![]() |
Download your free copy of the award winning ForPilots LogBook program today! |
I have a two cylinder single stage w/60 gal tank and I get by quite
nicely.Most two stage compressors need at least a 30 amp 230 volt circuit for start up.I only had 20 amps available so I went with the single stage it does a good job.If I run a die grinder or sand blaster I sometimes have to wait for it to recover but it still aint bad.Its a Devilbiss BTW. -=G.I.=- "K.M." wrote: > I was at Sears tonight, researching air compressors, and was told that I > would require AT LEAST a two-stage compressor for building an aircraft. > > What do others think of this advice? What does everyone here use? (Brand, > size, storage,etc) > > THANKS! ========= WAS CANCELLED BY =======: Path: news.sol.net!spool0-milwwi.newsops.execpc.com!newsengine.sol.net!news.maxwell.syr.edu!news.tele.dk!147.230.50.100!csnews.vslib.cz!not-for-mail From: Guy Incognito Newsgroups: sk.net.abuse,rec.aviation.homebuilt Subject: cmsg cancel <3B034A14.391FF736@nowhere.nohow> Control: cancel <3B034A14.391FF736@nowhere.nohow> Date: 18 May 2001 20:01:20 GMT Organization: Technical University of Liberec Lines: 1 Distribution: sk Message-ID: <5432633580012680@guido.is.slow.today> NNTP-Posting-Host: 202.9.153.48 X-Trace: morticia.kit.vslib.cz 990216085 723 202.9.153.48 (18 May 2001 20:01:25 GMT) X-Complaints-To: news@morticia.kit.vslib.cz NNTP-Posting-Date: Fri, 18 May 2001 20:01:25 +0000 (UTC) Cmon Guido, wheres those reposts: <3B034A14.391FF736@nowhere.nohow> |
| [BACK] | Return to the ForPilots.com archive page |