[month-index] [thread-index] [prev] [next] [thread-next]

Thanks for the help people, and I will try my best not to
misspellRotax anymore. As for the clip, I believe I have been putting
it in correctly, below the the white spring retainer . I slide the jet
needle in the slider first, then compress spring and white retainer
and insert cable in slider. Correct way? I received a book on the
carb today---and will preform some of the tests they recommended and
also checking for blockage at the atomizer and idle air jet. Plugs
show only a slight rich mixture. I am using GOLDEN SPECTRO synthetic
blend in a mix of 52:1. Could this oil be a problem? Again, thanks
for everyones help concerning this.
Bob in Lancaster PA

View index by [date] [author] [subject]
Previous Message:: Re: More ballistic parachute
Next Message:: Re: Rotax mechanic in DFW area?
Next message in thread:: Re: Sorry, Rotax - 447 problems -carb