|
Download your free copy of the award winning ForPilots LogBook program today! |
Mr Finch Forget what you hear about EGT on two strokes it is a very important gage and should be fitted to all Rotaxes air or water cooled and probes and dual gage for each cylinder. EGT tells you what is happening in each of your cylinders in three regimes idle on the needles and on the main jet. Ted Heath Aircraft Technician. "JGFinch" news:20001031132433.20753.00000662@ng-cl1.aol.com... > Earlier I had told you about my 447 and its oscillating problem. Thanks for the > info. Heres what I did to fix the problem. I replaced my fuel filter, fuel > pump, carb socket, and all needle valves. I also repitched my prop to get > higher rpms. The one thing that probably fixed the oscillation was the new jet > needle and clip just as most of you thought it would be. Now here is my new > problem, if it is one. > I cant seem to get my CHT temps high enough, runs at 250 to 310 max. Any > suggestions? > Thanks again. > Jerry > |
| [BACK] | Return to the ForPilots.com archive page |